Every day valuable employees risk back injuries, pulled muscles and torn ligaments when installing or removing data center equipment. With RackLift Equipment Lifts you can practically eliminate the risk of injury and dropped equipment with one affordable, simple device.

RackLift uses a patented hi-ratio safety winch equipped with auto-brake to facilitate heavy equipment lifting with ease and safety.

When the desired rack height is reached the technician simply let’s go of the handle and effortlessly slides the equipment into the rack. No strain, no pain, no risk of dropped equipment.

RackliftTM Equipment Lift Benefits

  • Rotates 360 degrees within the aisle
  • Anti-static wheels
  • Far less expensive than powered units
  • No electrical components to fail
  • No batteries to charge
  • Light weight, small footprint
  • Reduces lost-time injuries
  • Improve employee morale
  • Increases productivity
  • Reduces equipment damage
  • Accurate alignment
  • Easy-to-use powerful hand crank
  • Crank auto-locks when handle is released
  • Lift up to 650 lbs.
  • Precise height control
  • Slide equipment into rack on glide rails
  • Fits into standard 19″ racks
  • Security straps for enhanced safely
RackLift Brochure
RackLift Brochure 2

Racklift Models

RL400 – 400lb Manual Server Lift

The RL400 Server Lift was created to fill the need for medium duty lifts of up to 400 pounds in a datacenter or head end facility.
Devices can be lifted more safely, easily and with greater productively.

Benefits

  • Lift Up To 400 Pounds
  • Slide Equipment 24 Inches Into Rack On Glide Rails
  • 360 ̊ Rotation In Tight Aisles
  • Far Less Expensive Than Powered Units
  • No Electrical Components To Fail
  • No Batteries To Charge
  • Light Weight, Small Footprint
  • Reduces Lost-Time Injuries
  • Improve Employee Morale
  • Increases Productivity
  • Reduces Equipment Damage
  • Accurate Alignment
  • Easy-To-Use Powerful Hand Crank
  • Crank Auto-Locks When Handle Is Released
  • Precise Height Control
  • Fits Into Standard 19” Racks
  • Security Straps For Enhanced Safety
RL400 Spec Sheet

RL600S – 650lb Manual Server Lift

The RL600S Manual Server Equipment Lift was created to fill the need to more safely, easily and productively lift up to 650 pounds in a datacenter or head end facility.

For a shortened version designed for “container data centers” or “PODs”, we offer Model RL600C.
To lift up to 400 pounds in a standard data center,we offer Model RL400.

Benefits

  • Lift Up To 650 Pounds
  • Slide Equipment 24 Inches Into Rack On Glide Rails
  • 360˚ Rotation In Tight Aisles
  • Far Less Expensive Than Powered Units
  • No Electrical Components To Fail
  • No Batteries To Charge
  • Light Weight, Small Footprint
  • Reduces Lost-Time Injuries
  • Improve Employee Morale
  • Increases Productivity
  • Reduces Equipment Damage
  • Accurate Alignment
  • Easy-To-Use Powerful Hand Crank
  • Crank Auto-Locks When Handle Is Released
  • Precise Height Control
  • Fits Into Standard 19″ Racks
  • Security Straps For Enhanced Safety
RL600S Spec Sheet

RL600C – Shortened Server Lifter

The RL600C was purpose built to facilitate entry to “container data centers” or “PODs”. It is a shortened version of the RL600S, also capable of lifting 650 pounds more safely, easily and with greater productively.

Benefits

  • Lift Up To 650 Pounds
  • Slide Equipment 24 Inches Into Rack On Glide Rails
  • 360˚ Rotation In Tight Aisles
  • Far Less Expensive Than Powered Units
  • No Electrical Components To Fail
  • No Batteries To Charge
  • Light Weight, Small Footprint
  • Reduces Lost-Time Injuries
  • Improve Employee Morale
  • Increases Productivity
  • Reduces Equipment Damage
  • Accurate Alignment
  • Easy-To-Use Powerful Hand Crank
  • Crank Auto-Locks When Handle Is Released
  • Precise Height Control
  • Fits Into Standard 19″ Racks
  • Security Straps For Enhanced Safety
RL600C Spec Sheet

RL650E – 650lb Electric Server Lift

The RL650E electric server lift was built to facilitate heavy lifting of equipment batteries or servers weighing up to 650 pounds within 45 seconds bottom to top; more safely, with a shelf that extends  24” into a 19″ or 23” rack at 40U.
The battery powered winch is made in the USA and rated for one hour of continuous operation equal to sixty equipment installations. The battery can be recharged in 3 hours with the included smart charger. High-efficiency winch, low current draw, sealed 1.6 hp permanent magnet motor featuring mechanical load holding and dynamic brake. All steel planetary gear twice as wide as those used by the competition.

Benefits

  • Lift Up To 650 Pounds
  • Slide Equipment 24 Inches Into Rack On Glide Rails up to 650 Pounds
  • 360˚ Rotation In Tight Aisles
  • Far Less Expensive Than Other Powered Units
  • High-Efficiency Winch, low current draw, sealed 1.6 hp permanent magnet motor featuring mechanical load holding and dynamic brake. All steel planetary gear twice as wide as those used by the competition and utilizes machined-in, oil pocket bronze bearings, ergonomic cam action free spooling clutch
  • Circuit breaker protected and weather sealed solenoid contact 4-way roller fairlead,  Limited Lifetime Winch Warranty
  • Quick Charge Easy to Replace Batteries with Two Hour Continuous Run Time; Three Year Warranty
  • Light Weight, Small Footprint
  • Reduces Lost-Time Injuries
  • Improve Employee Morale
  • Increases Productivity
  • Reduces Equipment Damage
  • Accurate Alignment
  • Precise Height Control
  • Fits Into Standard 19″ Racks
  • Mounted Security Straps For Enhanced Safety
RL650E Spec Sheet

RL700E – 750lb Electric Battery Lift

The RL700E Battery Lift was built to facilitate heavy lifting of battery’s equipment, or servers weighing up to 750 pounds within 49 seconds bottom to top; more safely, with an optional shelf that extends 24” into a 19″ or 23” Rack at 46U. The RL700 can be custom built to service heights to 52U or 100 inches.

The Electric DC battery powered winch is also made in the USA and rated for one hour of continuous operation equal to sixty equipment installations. It is rechargeable with a smart wall charger (included) within three hours. High-Efficiency Winch, low amp draw, sealed 1.6 hp permanent magnet motor featuring mechanical load holding and dynamic brake. All steel planetary gear twice as wide as those used by the competition.

RL700E Spec Sheet

RL5000E – 5000lb Server Rack Lifter

The RL700E Battery Lift was built to facilitate heavy lifting of battery’s equipment, or servers weighing up to 750 pounds within 49 seconds bottom to top; more safely, with an optional shelf that extends 24” into a 19″ or 23” Rack at 46U. The RL700 can be custom built to service heights to 52U or 100 inches.

The Electric DC battery powered winch is also made in the USA and rated for one hour of continuous operation equal to sixty equipment installations. It is rechargeable with a smart wall charger (included) within three hours. High-Efficiency Winch, low amp draw, sealed 1.6 hp permanent magnet motor featuring mechanical load holding and dynamic brake. All steel planetary gear twice as wide as those used by the competition.

RL700E Spec Sheet